Important Note: We are still working with JTech to finalize the mount. We want it to be perfect. We expect to have it completed and ready to ship sometime in September.  If your Onefinity machine ships before hand, we will ship the Laser seperatly.

 

Easy All-in-One Laser and Mounting Kit for the Onefinity CNC. This laser is manufactured specifically for the Onefinity by J-Tech (jtechphotonics.com)

 

Comes with everything you need to start lasering on the Onefinity CNC.

Works with all versions of the Onefinity CNC Machine!

 

*machine not included. 

 

The standard kit comes with:

Laser diode component with mounting screws

Laser Shroud or Magnet Base Plate

Adjustable Safety Compliant Laser Diode Driver

Power Cord

Laser Safety Goggles for 445nm Lasers

Laser Fan

Laser Mount

3 foot Mini Molex Jr. Input Cable

Mounting Screws

Driver Mounting Sticky Squares

10 foot Laser and Fan Extension Cables

Zip Ties and Zip Tie Holders

Press Fit Connector and Tool

 

Features:

We still have all of the features that make this laser kit awesome – precision laser trimmed regulators for constant current to the laser, 0.01 tuning resolution, digital isolation, soft start, esd protection, current limiting, and the list goes on.  But NOW we have more safety in mind as well!  The US Federal Government has a list of things that are required for operating these high power class 4 lasers.  They might seem trivial, but they could save your eyesight!  Here is a run down of the new safety features to protect yourself and others:

 

Key Switch – This key is needed to enable the laser.  When the key switch is turned on, the laser is enabled and the key CANNOT come out.  You can only remove the key when it is disabled.  This feature is good if you have curious children or have your laser in a shared area and want to limit use.  Just take the key out and hide it!

 

Remote Interlocks – This feature allows for addition of switches to your enclosure so when it is open, the laser will automatically turn off.  Also provides for the addition of an E Stop button for the laser, which is always good for if you need to stop the laser super quick!  Add as many switches as you want to make a super safe area for your laser machine so nobody can accidentally look into the laser.

 

Power Fault Protection – This one may seem like it is not needed, but hear us out.  Consider your power goes out in your area where the laser is located.  You were running your program and then everything is dark…  Power doesn’t come back on for awhile… long enough for you to forget that the laser was left ON!  You come back and are checking your laser and boom, the power is back on, right when you are looking straight at it.  Well, don’t worry because the laser will be disabled whenever the power to the driver is lost.  Press the reset button and you are back in action!

 

Emission Indicator –  The small little LED on the front to let you know  your really super bright laser is on…  They require this in case you are using an infrared invisible laser.

 

To Learn more please visit: jtechphotonics.com

Onefinity 7W Laser

C$975.50 Regular Price
C$877.95Sale Price
  • Easy All-in-One Laser and Mounting Kit for the Onefinity CNC. This laser is manufactor specifically for the Onefinity by J-Tech (jtechphotonics.com)

    Comes with everything you need to start lasering on the Onefinity CNC.

    Works with all versions of the Onefinity CNC Machine! 

     

    *machine not included. 

     

Product info:

Our rails are composed of two 35mm hardened steel tubes.  We use sealed linear bearings for smooth, maintenance free motion.  All axis ball screws come standard.  Assembly time should be less than one hour because most parts come preassembled!

Our advanced controller is a fully enclosed, smart CNC controller with built in CAM software allowing for operation without a computer!  Built on the tested and proven Buildbotics open source, this allows us to drive our motors at higher rates for a smoother operation.  With built-in features including 4 motor channels at up to 6A, microstepping up to 256, step rates up to 250k/sec per channel, and smooth S-curve acceleration on the fly which gives you clean cuts and prolonged tool life. We think this is the best controller yet.

 

We understand that you want to protect your investment for the long term. This is why we NEVER require the Onefinity to be connected to the internet.  It is 100% able to work offline.  However, we think one of the best features of our controller is the ability to connect it to a network (via built in ethernet or wifi).  While this feature is 100% optional, it opens up some really cool abilities.  First, your controller can receive firmware updates and bug fixes to enhance the Onefinity’s abilities.  Secondly, once connected to your network, your Onefinity can connect to any device with a web browser on the same network. By doing this, you can control your Onefinity via a phone, tablet, or computer.  We’ve even had it connected to a game console!  With the optional USB camera you can keep an eye on your Onefinity CNC from anywhere!

Designed in Canada

Manufactured in Canada

Tested in Canada (each unit is fully tested before shipping)

Supported in Canada and USA

 

What’s included in the kit:

3 Preassembled X and dual Y rails

1 Preassembled Z Slider

1 Electronics Controller

1 7” High definition touchscreen display

4 Quick connect wire harness’s

1 Controller to touchscreen wire harness

Not included:

Makita Router. The Onefinity is designed to work with the Makita RT0701C Trim Router.

Bits and Cutters. You will need to supply your own bits and cutter.

Waste Board. We recommend 3/4'" MDF. The size will depend on the machine you purchased and your setup.

Stay Connected

  • White Instagram Icon
  • White YouTube Icon
  • Facebook

©2020 by Kirbre Enterprises Inc