New and Improved! The plastic parts are now injection molded using a high strength, high stiffness glass fiber reinforced material. These new Oops clamps are awesome!


Oops Clamps are ultra low profile, high strength clamps with a replaceable "oops" tip. The Oops Clamp design offers the clamping force of metal clamps with the safety of plastic clamps. All hardware is standard off the shelf M6 or 1/4-20. Different lengths can be easily acquired at your local hardware store. You may also remove slide connector to use larger hardware.


Check out the Oops Clamps Video...


Important Note: While Oops clamps are designed to use different hardware to install to individual wasteboards, please ensure to only use M6 screws for the Jackscrew.  The Oops clamps have been pre-tapped and the use of other threads may affect the performance or durability of the product.  Please see safety manual for proper use and installation.


This 45 piece set comes complete with 8 Oops Clamps (4 standard length and 4 long ), 4 replacement "oops" tips, M6x16mm Button screws (8 pieces), M6x30mm Button screws (8 pieces), M6x45mm Button screws (8 pieces), washers and Allen Key.


Using T-Track? Check out our conversion kit...Oops Clamps Hand Nut for 1/4 20 t-track



Long version has an overall length of 84mm with an adjustment range of 51mm's

Short version has an overall length of 65mm with an adjustment range of 32mm's

Please see specification sheet on the Assembly Tips and Tricks page for more info.

23 Piece Oops Clamps set

  • Have you ever misjudged your cutting path? No problem with the Oops Clamps. If you cut into the tip it won't mess up your carve or damage your cutter like a metal or even a thick hardwood clamp can do. Best of all, the tip is easily replaced if you do cut into it! Additionally, Oops clamps are ultra low profile so you can cut deeper without worrying about your Spindle, Collet or Dust Boot hitting the clamp. Check out the Oops Clamps Video...

Product info:

Our rails are composed of two 35mm hardened steel tubes.  We use sealed linear bearings for smooth, maintenance free motion.  All axis ball screws come standard.  Assembly time should be less than one hour because most parts come preassembled!

Our advanced controller is a fully enclosed, smart CNC controller with built in CAM software allowing for operation without a computer!  Built on the tested and proven Buildbotics open source, this allows us to drive our motors at higher rates for a smoother operation.  With built-in features including 4 motor channels at up to 6A, microstepping up to 256, step rates up to 250k/sec per channel, and smooth S-curve acceleration on the fly which gives you clean cuts and prolonged tool life. We think this is the best controller yet.


We understand that you want to protect your investment for the long term. This is why we NEVER require the Onefinity to be connected to the internet.  It is 100% able to work offline.  However, we think one of the best features of our controller is the ability to connect it to a network (via built in ethernet or wifi).  While this feature is 100% optional, it opens up some really cool abilities.  First, your controller can receive firmware updates and bug fixes to enhance the Onefinity’s abilities.  Secondly, once connected to your network, your Onefinity can connect to any device with a web browser on the same network. By doing this, you can control your Onefinity via a phone, tablet, or computer.  We’ve even had it connected to a game console!  With the optional USB camera you can keep an eye on your Onefinity CNC from anywhere!

Designed in Canada

Manufactured in Canada

Tested in Canada (each unit is fully tested before shipping)

Supported in Canada and USA


What’s included in the kit:

3 Preassembled X and dual Y rails

1 Preassembled Z Slider

1 Electronics Controller

1 7” High definition touchscreen display

4 Quick connect wire harness’s

1 Controller to touchscreen wire harness

Not included:

Makita Router. The Onefinity is designed to work with the Makita RT0701C Trim Router.

Bits and Cutters. You will need to supply your own bits and cutter.

Waste Board. We recommend 3/4'" MDF. The size will depend on the machine you purchased and your setup.

Stay Connected

  • White Instagram Icon
  • White YouTube Icon
  • Facebook

©2020 by Kirbre Enterprises Inc